HIKVISION DS-2DB4236I-CWX

© Hikvision
Figure 4-3 Start Live View
Table 4-1 Descriptions of the Toolbar and Live View Parameters
Icon
Description
Click the button to enable Pixel Counter. Draw an area in live view
window, and it shows the height and width of the selected area.
/
Start/stop Live view.
Manually capture the pictures.
/
Manually start/stop recording.
/
Steps:
1. Click the button to enter the regional exposure operation mode.
2. Draw a rectangle on the image as target exposure region.
/
Steps:
1. Click the button to enter the regional focus operation mode.
2. Draw a rectangle on the image as the target focus region.
/
Mute/audio on and adjust volume
Note:
The function is only supported by certain camera models.