HIKVISION DS-2DB4236I-CWX User Manual

© Hikvision
Figure 5-18 Alarm Output Settings
6. You can copy the settings to other alarm outputs.
7. Click to save the settings.
5.2.5 Handling Exception
The exception type can be HDD Full, HDD Error, Network Disconnected, IP Address Conflicted and
Illegal Login.
Steps:
1. Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section 5.2.1
Configuring Motion Detection.

HIKVISION DS-2DB4236I-CWX Specifications

General

Brand	HIKVISION
Model	DS-2DB4236I-CWX
Category	Digital Camera
Language	English