© Hikvision
Figure 5-19 Exception Settings
3. Click to save the settings.
Note:
Trigger alarm output is only supported by certain camera models.
5.3 Smart Event Configuration
Note:
The functions vary depending on different camera models.
Before Smart Event Configuration, you need to set VCA Resource as Smart Event:
Configuration > System > System Settings > VCA Resource
5.3.1 Detecting Audio Exception
Note:
The function is only supported by certain camera models.
Purpose:
When you enable this function and audio exception occurs, the alarm actions will be triggered.
Steps:
1. Enter the video audio exception detection interface:
Configuration > Event > Smart Event > Audio Exception Detection
To Next Page
Loading...
Need help?
General
