© Hikvision
1. Enter the SNMP settings interface:
Configuration > Network > Advanced Settings > SNMP
Figure 6-8 SNMP Settings
2. Check the corresponding version checkbox (Enable SNMP v1, Enable SNMP v2c, Enable
SNMP v3) to enable the feature.
3. Configure the SNMP settings.
Note:
The configuration of the SNMP software should be the same as the settings you configure
here.
4. Click to save and finish the settin
Configuring FTP Settings
Purpose:
You can set a FTP server and configure the following parameters for uploading captured pictures.
Steps:
1. Enter the FTP settings interface:
To Next Page
Loading...
