User Manual of Network Mini PTZ Camera
© Hikvision
11.3 Configuring Anonymous Visit
Enabling this function allows visit for whom doesn’t have the user name and
password of the device.
Only live view is available for the anonymous user.
Steps:
1. Enter the Anonymous Visit interface:
Configuration> Advanced Configuration> Security > Anonymous Visit
Figure 11-4 Anonymous Visit
2. Set the Anonymous Visit permission Enable or Disable in the drop-down list to
enable or disable the anonymous visit.
3. Click Save to save the settings.
There will be a checkbox of Anonymous by the next time you logging in.
Figure 11-5 Login Interface with an Anonymous Checkbox
4. Check the checkbox of Anonymous and click Login.
By permitting the Anonymous “Live View” function, you may enable others to access
your speed dome and view live images without providing login credentials. It
therefore is critical when permitting the Anonymous "Live View" function to ensure
that your camera's field of view does not impact the privacy of individuals whose
images might be captured without authorization.
Given its inherent intrusiveness, video surveillance is inappropriate in areas where
people have a higher expectation of privacy.
11.4 Configuring IP Address Filter
With this function on, the camera allows certain IP addresses whether to log in or
not.
Forbid the IP addresses added in the IP Address
Filter interface to log in.
To Next Page
Loading...
