HIKVISION DS-2DF8223I-AEL - Page 22

Network Speed Dome Installation Manual
16
1
2
3 4
Network Speed
Dome
Ethernet
1: Power Indicator
2: PORT Indicator
3:DATA&POWER OUT
4: DATA IN
Figure 1-35 Hi-PoE Connection
Steps:
1. Connect the Hi-PoE module to the internet via the DATA IN interface with a network cable.
2. Connect the Hi-PoE module to the speed dome via the DATA & POWER OUT interface with a
network cable.
3. Power on the Hi-PoE module.
Please power the Hi-PoE module according to its power supply parameters.