HIKVISION DS-3E0108P-E - Chapter 1 Product Overview; Overview; Packing List

Unmanaged PoE Switch/User Manual
1
Chapter 1 Product Overview
1.1 Overview
DS-3E0108P-E
Hikvision unmanaged PoE switch, DS-3E0108P-E, provides 8 * 100 Mbps RJ45 ports, and ports 1 – 4 can provide power
to IEEE 802.3af/IEEE 802.3at standard powered devices, such as access point, IP camera, IP phone and so on. The power
output totals 58 W.
DS-3E0109P-E/M
Hikvision unmanaged PoE switch, DS-3E0109P-E/M, provides 8 * 100 Mbps downlink RJ45 ports, and one 100 Mbps
uplink RJ45 port. Ports 1 - 8 can provide power to IEEE 802.3af/IEEE 802.3at standard powered devices, such as access
point, IP camera, IP phone and so on. The power output totals 58 W.
DS-3E0318P-E/M
Hikvision unmanaged PoE switch, DS-3E0318P-E/M provides 16 * 100 Mbps downlink RJ45 ports, one 1000 Mbps
uplink RJ45 port, and one 1000 Mbps independent uplink SFP port. Ports 1 - 16 can provide power to IEEE 802.3af/IEEE
802.3at standard powered devices, such as access point, IP camera, IP phone and so on. The power output totals 135 W.
DS-3E0326P-E/M
Hikvision unmanaged PoE switch, DS-3E0326P-E/M, provides 24 * 100 Mbps downlink RJ45 ports, one 1000 Mbps
uplink RJ45 port, and one 1000 Mbps independent uplink SFP port. Ports 1 - 24 can provide power to IEEE 802.3af/IEEE
802.3at standard powered devices, such as access point, IP camera, IP phone and so on. The power output totals 225 W.
In addition, DS-3E0109P-E/M, DS-3E0318P-E/M and DS-3E0326P-E/M are equipped with a network mode switch.
DS-3E0109P-E/M can enable/disable EXTEND mode by flipping the switch between EXTEND ON and EXTEND OFF.
DS-3E0318P-E/M and DS-3E0326P-E/M can use this switch to change the network mode to Priority, Standard, Isolate, or
EXTEND.
1.2 Packing List
Model
DS-3E0108P-E
DS-3E0109P-E/M
DS-3E0318P-E/M
DS-3E0326P-E/M
Switch
*Take DS-3E0109P-E/M as an
example
√
√
√
√
Pads
√
×
√
√