Digital Video Recorder Quick Start Guide
13
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the User Manual for activating the inactive IP camera.
Go to Camera > IP Camera.
Click Custom Add.
Enter IP address, protocol, management port, and other information of the IP camera.
Click Add.
Add IP Camera
Connect PoC Cameras
Certain models support PoC (Power over Coaxitron) cameras connection. DVR will detect the connected PoC
cameras automatically, manage the power consumption via the coaxial communication, and provide power to
the cameras via coaxitron.
Before you start
Connect the PoC camera to the DVR.
Go to Camera > Camera > PoC Status.
Check the status of connected PoC camera. You can click the channels in PoC Channel to turn on/off the
PoC power supply as your desire.
If the power consumption of the DVR is higher than that of the AT camera, when AF or AT camera is
connected, it is powered on normally.
If the power consumption of the DVR is lower than that of AF camera, when AF or AT camera is
connected, there is no video and “Insufficient Power for PoC” is overlaid on the live view image.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
