HIKVISION DS-7104NI-SL/W - Setting Date and Time

Network Video Recorder
4. Formatting a Disk (cont.)
3. Click the Init button.
4. A confirmation message will appear on the screen.
Click the OK button to continue the formatting
process.
5. The status column will show the Initialization progress.
After the disk has been formatted, the status of the
disk will change to Normal.
6. Click to exit out of HDD Menu.
5. Setting Date & Time
To Setup Date and Time:
1. Enter the Time/Date menu by going to Main Menu
> System Configuration > General > Time/Date.
2. Select the correct time zone. Enter the correct date and time.
3. Click the Apply button to save the settings.