HIKVISION DS-7200-ST Series Quick Operation Guide

DS-7200-ST Series DVR Quick Operation Guide
34
Menu Operation
Menu Structure
The menu structure of the DS-7200-ST Series DVR is as following:
Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of your DVR.
To start your DVR:
1. Ensure the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) is used in conjunction with the unit.
2. Press the POWER switch on the rear panel. After the power has been started up, the POWER indicator will
light green.
To shut down the DVR:
1. Enter the Shutdown menu by clicking on Menu >ShutDown.
2. Select the ShutDown button.
3. Click the Yes button in the pop-up attention box to confirm the shutdown.
4. For the DS-7200HVI-ST/SN and DS-7200HFI-ST/SN models, you are allowed to power off the unit only when
the following interface appears:

HIKVISION DS-7200-ST Series Specifications

General

Brand	HIKVISION
Model	DS-7200-ST Series
Category	DVR
Language	English