41
Playing Back from System Log
You may also playback recordings from the System Log.
To playback video from the System Log:
1. Enter the Log Search menu by clicking Menu > Maintenance > Log Search (shown in Figure 6).
Figure 6. Log Search Menu
2. Set Major Type setting to Information.
3. Set Minor Type setting to Start Record or End Record.
4. Set Start Time and End Time.
5. Click the Search button.
6. A list of results with your search criteria will be returned. Select the video log to playback and click
Play.
7. The recording will begin to play in the Playback interface.
Playing Back Frame-by-Frame
To playback frame-by-frame in the Playback interface:
• Using a Mouse:
1. Click the Slow Forward button on the Playback Control Panel until the speed changes to Single
frame.
2. Click the Pause button to advance the video frame by frame.
• Using the Front Panel/Remote:
1. Rotate the inner control on Jog Shuttle counterclockwise or press the Down button to set the play to
Single frame.
2. Press the OK button.
3. Press the Enter button to advance the video frame by frame.
To Next Page
Loading...
Need help?
General