75
Configuring OSD Settings
On Screen Display (OSD) settings can be configured in the Camera Management menu. The OSD is shown in each
display during Live Preview mode and includes the time and date as well as the camera name.
To configure OSD settings:
1. Enter the Camera Management/Settings menu, shown in Figure 1 by clicking Menu > Settings >
Camera.
2. Select channel to setup OSD settings under Channel #.
3. Configure desired OSD settings, as shown in Figure 1.
Figure 1. OSD Settings Menu
Setting up Privacy Mask
You may setup privacy mask to mask off sensitive or private areas in the field of view of a camera.
To setup privacy mask:
1. Enter the Camera Management/Settings menu, shown in Figure 1 by clicking Menu > Settings >
Camera.
2. Select the Advanced tab to enter the Advanced Camera Settings menu, shown in Figure 2.
3. Select channel to setup privacy mask under Channel #.
To Next Page
Loading...
Need help?
General