Digital Video Recorder User Manual
40
Step 4 After the time settings, click Next button to enter the General Network Setup Wizard
interface as shown below.
Figure 2-20 General Network Configuration
Step 5 Click Next button after you configured the basic network parameters.
Then you will enter the Hik-Connect interface. Configure the Hik-Connect according to your
need. Refer to Chapter 12.2.2 Configuring Hik-Connect for detailed operations.
Figure 2-21 Hik-Connect Configuration
Step 6 Click Next button to enter the Advanced Network Parameters interface. You can enable
DDNS and set other ports according to your need.
To Next Page
Loading...
