EasyManuals Logo

HIKVISION DS-7208HQHI-K2/P User Manual

HIKVISION DS-7208HQHI-K2/P
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Digital Video Recorder User Manual
40
Step 4 After the time settings, click Next button to enter the General Network Setup Wizard
interface as shown below.
Figure 2-20 General Network Configuration
Step 5 Click Next button after you configured the basic network parameters.
Then you will enter the Hik-Connect interface. Configure the Hik-Connect according to your
need. Refer to Chapter 12.2.2 Configuring Hik-Connect for detailed operations.
Figure 2-21 Hik-Connect Configuration
Step 6 Click Next button to enter the Advanced Network Parameters interface. You can enable
DDNS and set other ports according to your need.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7208HQHI-K2/P and is the answer not in the manual?

HIKVISION DS-7208HQHI-K2/P Specifications

General IconGeneral
HDD interfaceSerial ATA
Maximum HDD capacity6000 GB
Number of HDDs supported2
Power consumption (typical)60 W
Voltage12 V
Product colorBlack
Audio output channels1.0 channels
Video compression formatsH.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
BNC input ports1
Video input channels8 channels
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LANYes
Ethernet interface typeFast Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight17480 g
Dimensions (WxDxH)380 x 320 x 48 mm

Related product manuals