User Manual of Digital Video Recorder
65
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done
before you control the PTZ camera.
Steps:
1.
Enter the PTZ Settings interface.
Menu >Camera> PTZ
Figure 4. 1 PTZ Settings
2.
Choose the camera for PTZ setting in the
Camera
dropdown list.
3.
Click the
RS-485 Settings
button to set the RS-485 parameters.
Figure 4. 2 PTZ- General
4.
Enter the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera parameters.
To Next Page
Loading...
Need help?
General