Digital Video Recorder Quick Start Guide
9
3.5 User Logout, Shutdown and Reboot
Purpose
You can log out of the system, shut down, or reboot the device on your demands.
Step 1 Go to Menu > Shutdown.
Step 2 Click Logout, Shutdown, or Reboot.
After you have logged out of the system, menu operation
on the screen is invalid. It is required to enter a user
name and password to unlock the system.
3.6 Configuring Signal Input
Purpose
For some models, you can configure the analog and IP signal input types and 5 MP long distance transmission.
For other models, the analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP signal input can be recognized
and connected automatically.
Step 1 Go to Menu > Camera > Signal Input Status.
Figure 3-5 Signal Input Status
The Signal Input Status interface differs with different models.
Step 2 Check the checkbox to select different
signal input types: HD/CVBS and IP.
Step 3 Click to enter the 5 MP Long Distance
Transmission Settings interface.
Step 4 Check the channel(s) to enable 5 MP long
distance transmission.
Step 5 Click Apply to save the settings and OK to
return to the Signal Input Status interface.
Step 6 Click Apply on the Signal Input Status
interface.
Figure 3-6 5 MP Long Distance Transmission Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
