Digital Video Recorder Quick Start Guide
12
Step 2 Check the Enable checkbox to activate the function.
Then the Service Terms interface pops up.
1) Create the verification code and enter the code in
the Verification Code text field.
2) Check the checkbox of The Hik-Connect service will
require internet access. Please read Service Terms
and Privacy Statement before enabling the
service.
3) Scan the QR code on the interface to read the
Service Terms and the Privacy Statement.
4) Click OK to save the settings and return to the
Hik-Connect interface.
Figure 3-12 Service Terms
Hik-Connect is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms interface pops up and you should check the
checkbox before enabling it.
Step 3 (Optional) Check Custom and enter the Server
Address.
Step 4 (Optional) Check Enable Stream Encryption.
After this feature is enabled, the verification
code is required for remote access and live view.
You can use the scanning tool of your phone to quickly get
the code of the device by scanning the QR code.
Figure 3-13 Hik-Connect Settings
Step 5 Click Apply to save the settings.
Step 6 After configuration, you can access and manage the DVR by your mobile phone or by the website
(www.hik-connect.com).
For the iOS users, please scan the QR code below
to download the Hik-Connect application for the
subsequent operations.
Figure 3-14 QR Code for iOS Users
For the Android users, please scan the QR code
below to download the Hik-Connect application
for the subsequent operations. You must install
googleplay on your Android mobile phone to skip
to the address successfully.
Figure 3-15 QR Code for Android Users
To Next Page
Loading...
Need help?
General
Weight and Dimensions
