User Manual of Digital Video Recorder
38
Figure 2. 9 HDD Management
7.
To initialize the HDD, click the Init button. Initialization will remove all the data saved in the HDD.
8.
Click Next to enter the IP Camera Management window (only supported by HDVR series).
9.
Click Search to search the online IP Camera and the Security status shows whether it is active or inactive.
Before adding the camera, make sure the IP camera to be added is in active status.
If the camera is in inactive status, you can click the inactive icon of the camera to set the password to
activate it. You can also select multiple cameras from the list and click the One-touch Activate to activate
the cameras in batch.
Click the Add to add the camera.
Figure 2. 10 IP Camera Management
10.
After finishing IP Camera settings, click Next to enter the Record Settings window.
11.
Click the icon , and you can enable the continuous recording or motion Detection recording for all
channels of the device.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
