Network Video Recorder User Manual
161
If “Manually Clear” is selected in the dropdown list of Dwell Time, you can clear it only by going to
Menu> Manual> Alarm.
Figure 8-16 Alarm Output Setup Interface
Step 3 Set up arming schedule of the alarm output.
Choose one day of a week and up to 8 time periods can be set within each day.
Time periods shall not be repeated or overlapped.
Figure 8-17 Set Arming Schedule of Alarm Output
Step 4 Repeat the above steps to set up arming schedule of other days of a week. You can also use
Copy button to copy an arming schedule to other days.
Click the OK button to complete the video tampering settings of the alarm output No..
Step 5 You can also copy the above settings to another channel.
To Next Page
Loading...
Need help?
General
