HIKVISION DS-76 NI-I2/P Series User Manual

Network Video Recorder User Manual
236
Figure 14-20 Copy Settings to Other Camera(s)
Step 6 Select the camera (s) to be configured with the same quota settings. You can also click the
checkbox of IP Camera to select all cameras.
Step 7 Click the OK button to finish the Copy settings and back to the Storage Mode interface.
Step 8 Click the Apply button to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record and
picture capture.

HIKVISION DS-76 NI-I2/P Series Specifications

General

Brand	HIKVISION
Model	DS-76 NI-I2/P Series
Category	Network Hardware
Language	English