Network Video Recorder User Manual
64
Figure 2-37 Password Configuration of the Camera
Step 3 Click OK to save the settings and exit the interface.
Configuring the customized protocols
Purpose:
To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them.
Step 1 Click the Protocol button in the custom adding IP camera interface to enter the protocol
management interface.
Figure 2-38 Protocol Management Interface
There are 16 customized protocols provided in the system, you can edit the protocol name;
and choose whether to enable the sub-stream.
Step 2 Choose the protocol type of transmission and choose the transfer protocols.
To Next Page
Loading...
Need help?
General
