User Manual of Digital Video Recorder
141
10.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to device, and use it as network HDD.
Steps:
1. Enter the HDD Information interface.
Menu > HDD > General
Figure 10. 6 HDD Information Interface
2. Click to enter the Add NetHDD interface, as shown in Figure 10.7.
Figure 10. 7 Adding NetHDD Interface
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
• Add NAS disk:
To Next Page
Loading...
