User Manual of Digital Video Recorder
68
5.9 Files Protection
Purpose:
You can lock the recorded files or set the HDD property to Read-only to protect the record files from being
overwritten.
Task 1: Protect file by locking the record files:
Steps:
1. Enter Export setting interface.
Menu> Export
Figure 5. 35 Export Interface
2. Check the checkbox to for selecting the channels.
3. Configure the record mode, record type, file type and start/end time.
4. Click to show the results.
Figure 5. 36 Export- Search Result
5. Protect the record files.
1) Find the record files you want to protect, and then click icon which will turn to ,
indicating that the file is locked.
2) Click to change it to to unlock the file and the file is not protected.
To Next Page
Loading...
