HIKVISION DS-D5019 Series User Manual

3
Chapter4. Basic Operation
4.1 Input Source Selection(optional)
Turn on the display unit when the power supply is on
and input source is confirmed.
Press ◄ key of the remote controller to enter the menu
as shown on the right. DS-D5019/22 /24/27inch LCD
display unit includes 2 input sources as HDMI and
VGA signal. Press direction keys to select the input
source and press MENU to accomplish the input
source selection.
Figure 4.1 Input Source
4.2 Input Audio Volume Adjustment(optional)
Turn on the display unit when the power supply is on
and input source is confirmed.
Press
► key of the remote controller to enter the menu
as shown on the right.
press ◄ or ► to adjust the value
of volume.
press MENU to accomplish the volume
adjustment.
Figure 4.2 Audio Volume
4.3 Auto Adjust
Turn on the display unit when the power supply is on
and input source is confirmed.
Press
AUTO key of the remote controller to enter the
menu as shown on the right(In VGA Signal).
Figure 4.3 Input Source
Press
key of the remote controller to enter the menu
as shown on the right
.
press ◄ or ► to adjust the value
of contrast.
Press MENU to accomplish the contrast
adjustment.
Figure 4.1 Input Source
◄
4.1 Contrast
4.2
Figure 4.2 Brightness
Brightness
Press
► key of the remote controller to enter the menu
as shown on the right.press ◄ or ► to adjust the value of
Brightness. press MENU to accomplish the Brightness
adjustment.
LCD Monitor User Manual

HIKVISION DS-D5019 Series Specifications

General

Brand	HIKVISION
Model	DS-D5019 Series
Category	Monitor
Language	English