HIKVISION DS-E00HQHI-XB Series

2) Set Direcon as A<->B, A->B, or A<-B.
A<->B
Only the arrow on the B side shows. An object crossing a congured line in both direcons
can be detected and trigger alarms.
A->B
Only an object crossing the congured line from the A side to the B side can be detected.
B->A
Only an object crossing the
congured line from the B side to the A side can be detected.
3) Click Max. Size and draw a quadrilateral in the preview window to set the maximum draw
area size of the target.
4) Click Min. Size and draw a quadrilateral in the preview window to set the minimum draw area
size of the target.
5) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the
detecon region.
5.
Adjust
Sensivity. Sensivity allows you to calibrate how readily movement triggers the alarm. A
higher value results in the more readily to triggers moon detecon.
6.
Oponal: Set Detecon Target as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
Note
This funcon is only available for certain models.
7.
Set the arming schedule. Refer to Congure Arming Schedule for details.
8.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
9.
Click Apply.
Intrusion
Detecon
Intrusion detecon funcon detects people, vehicles, or objects that enter and loiter in a pre-
dened virtual region.
Steps
1.
Go to Conguraon → Event → Perimeter Protecon → Intrusion .
2.
Select Camera to
congure.
3.
Turn on Enable.
4.
Set the detecon rules and detecon areas.
1) Select Arming Area.
2) Adjust Time Threshold and
Sensivity.
Sensivity
The size of the object that can trigger the alarm. The higher the value is, the more easily
the detecon alarm will be triggered. Its range is [1-100].
Time Threshold
Digital Video Recorder User Manual
61