HIKVISION DS-E00HQHI-XB Series - Configure Recording Parameter

The me you set to record before the scheduled me or event. For example, when an alarm
triggers the recording at 10:00, and if you set the pre-record me as 5 seconds, the camera
records at 9:59:55.
Post-Record
The me you set to record aer the event or the scheduled me. For example, when an
alarm triggered recording ends at 11:00, and if you set the post-record me as 5 seconds, it
records
ll 11:00:05.
Stream Type
Main stream and sub-stream are selectable for recording. When you select sub-stream, you
can record for a longer
me with the same storage space.
Video/Picture Expiry Time
The expiry me is period for a recorded le to be kept in the HDD. When the deadline is
reached, the le will be deleted. If you set the expired me to 0, the le will not be deleted.
The actual keeping me for the le should be determined by the capacity of the HDD.
Figure 6-28 Advanced Parameters
6.
Click OK to save the advanced sengs.
7.
Click Apply.
6.5.2
Congure Recording Parameter
Steps
1.
Go to Conguraon → Record → Parameter to congure camera main stream and sub-stream
parameters.
2.
Congure recording parameters.
Main Stream
Digital Video Recorder User Manual
72