HIKVISION DS-K1802 Series User Manual

DS-K1802 Series Card Reader
5
1. Fix the plate on the wall or
other places by using two
screws (PA4×25-SUS). Make
sure the arrows on the plate are
upwards.
2. Check whether the plate is fixed
and in the right direction.
3. Slide the card reader from the
direction A to B along the plate
side until the bottom matches
the joint. Make sure the card
reader is tightly on the wall or
other places.
4. Drag and move the card reader
to make sure it is fixed.

HIKVISION DS-K1802 Series Specifications

General

Brand	HIKVISION
Model	DS-K1802 Series
Category	Card Reader
Language	English