HIKVISION DS-K1T673 - Access Control Settings

Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
main staon, plaorm) are in the same IP segment, the two-way audio can be performed.
Go to Conguraon → Video Intercom → Linked Network Sengs .
Set the main
staon's IP address and SIP server's IP address.
Click Save.
Press Buon to Call
Steps
1.
Click Intercom → Press Buon to Call to enter the sengs page.
2.
Set the parameters.
-
Edit call No. for every buon.
-
Check Call Management Center to set the buon calling center.
Note
If you check Call Management Center and set the call No. as well, call management center has
higher privilege than call No.
8.5.21 Access Control Sengs
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
DS-K1T673 Series Face Recognion Terminal User Manual
104