HIKVISION DS-K1T673 - View Device Information; Set Time

You can also click Open to open the le folder to view details.
8.5.2 View Device Informaon
View the device name, language, model, serial No., QR code, version, number of channels, alarm
input, alarm output, lock and RS-485, device capacity, etc.
Click
Conguraon → System → System Sengs → Basic Informaon to enter the conguraon
page.
You can view the device name, language, model, serial No., QR code, version, number of channels,
alarm input, alarm output, lock and RS-485, device capacity, etc.
8.5.3 Set Time
Set the device's me zone, synchronizaon mode, and the device me.
Click Conguraon → System → System Sengs → Time Sengs .
Figure 8-3 Time Sengs
Click Save to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
DS-K1T673 Series Face Recognion Terminal User Manual
82