HIKVISION DS-K1T673 - Privacy Settings

Note
●
You can also change the sengs in System Sengs.
●
If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
●
If you do not
congure the applicaon mode and tap Next, the system will select Indoor by
default.
●
If you
acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.3 Privacy Sengs
Aer acvaon, selecng applicaon mode, and selecng network, you should set the privacy
parameters, including the picture uploading and storage.
Select parameters according to your actual needs.
Figure 6-3 Privacy
DS-K1T673 Series Face Recognion Terminal User Manual
37