DS-K2600 Serial Access Controller
30
Control Panel
Purpose:
You are required to activate the control panel first before you can use the
control panel.
Activation via SADP, and Activation via client software are supported.
6.1 Activation via SADP Software
SADP software is used for detecting the online device, activating the device,
and resetting the password.
Get the SADP software from the supplied disk or the official website, and
install the SADP according to the prompts. Follow the steps to activate the
control panel.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an inactive device.
To Next Page
Loading...
