DS-K2600 Series Access Controller
33
6.2 Activation via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk, and install the software according to the
prompts. Follow the steps to activate the control panel.
Steps:
1. Run the client software and the control panel of the software pops up, as shown in the
figure below.
Figure 6-3 Control Panel Interface
2. Click the Device Management to enter the Device Management interface.
3. Check the device status from the device list, and select an inactive device.
Figure 6-4 List Selecting Interface
To Next Page
Loading...
