HIKVISION DS-K2604T User Manual

DS-K2600 Series Access Controller
vi
Warnings:
 Please adopt the power adapter from the legitimate factory which can meet the
safety extra low voltage (SELV) standard.
 Do not install, wiring, or uninstall when the power is still on.
 To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
 This installation should be made by a qualified service person and should conform
to all the local codes.
 If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Note:
 Please do not drop the objects on hard surface, and keep the equipment from the
magnetic field. Avoid install the equipment to the vibrated or vulnerable places.
 Please do not install the device in the extreme temperature (higher than 65℃ or
lower than -20℃)
 Keep ventilation.
 Do not operate in humid environment.
 Do not operate in explosive environment.
 Keep the device clean and dry.
 Avoid bare electrical wire.

HIKVISION DS-K2604T Specifications

General

Material	Metal
Product type	Access controller
Certification	CE, FCC, CB
Product color	Gray
Brand compatibility	Hikvision
Operating temperature (T-T)	-20 - 65 °C

Weight and Dimensions

Depth	373 mm
Width	345 mm
Height	98 mm