HIKVISION DS-K3G200X-R/M-Dm55 - Page 47

Serial Port Sengs
Set serial port parameters.
Steps
1.
Click Conguraon → Access Control → Serial Port Sengs .
Figure 6-9 Serial Port Sengs
2.
Set the No., Baud Rate, Data Bit, Stop Bit and Parity.
3.
Set the Peripheral Type as Card Reader, Card Receiver, QR Code Scanner or Disable.
4.
Set the Peripheral
Posion as Entrance or Exit.
5.
You can view the serial port type, external device model and peripheral
soware version.
6.
Click Save.
Set Terminal Parameters
You can set terminal parameters for accessing.
Click Conguraon → Access Control → Terminal Parameters .
You can set Working Mode as Permission Free Mode or Access Control Mode.
Permission Free Mode
DS-K3G200(L)X Series Tripod Turnsle
36