Need help?Do you have a question about the HIKVISION DS-K3G200LX-R/Dm55 and is the answer not in the manual?
General| Model | DS-K3G200LX-R/Dm55 |
|---|---|
| Category | Turnstiles |
| Card Capacity | 100, 000 |
| Communication Mode | TCP/IP, RS-485 |
| Fingerprint Recognition Duration | <1s |
| FAR (False Acceptance Rate) | ≤0.001% |
| Protection Level | IP54 |
| Material | Stainless Steel |
| Access Control | Yes |
| Passage Width | 550 mm |
| Communication Interface | RS-485 |
| Output Interface | Relay output × 2 |
| Fingerprint Capacity | 3000 |
| Power Consumption | ≤60W |
| Working Temperature | -10°C to 55°C |
| Working Humidity | 10% to 90% (non-condensing) |
| Dimensions | 1200 mm × 280 mm × 980 mm (L × W × H) |
| Unlock Mode | Card, Fingerprint, QR Code |
| Passage Speed | 30 to 40 persons per minute |
Critical warnings for serious injury or death.
Precautions to prevent injury or equipment damage.
Outlines preparation and procedure for system wiring.
Instructions for disassembling turnstile pedestals.
Steps for correctly installing turnstile pedestals.
Steps to activate the device using the SADP tool.
Adding devices via IP, domain, or batch import.
Managing door lock, unlock, and remain open/closed states.
To Next Page
