HIKVISION DS-K3G200LX-R/Dm55 - Set DST; Change Administrators Password

Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
Manual
By default, the device
me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's me.
Server IP Address/NTP Port/Interval
You can set the server IP address, NTP port, and interval.
6.6.3 Set DST
Steps
1.
Click Conguraon → System → System Sengs → Time Sengs .
Figure 6-4 DST Page
2.
Enable DST.
3.
Set the DST start
me, end me and bias me.
4.
Click Save to save the sengs.
6.6.4 Change Administrator's Password
Steps
1.
Click Conguraon → User Management .
2.
Click
.
3.
Enter the old password and create a new password.
4.
Conrm the new password.
DS-K3G200(L)X Series Tripod Turnsle
29