Buon Conguraon Procedure
Figure 4-13 Procedure
Steps:
1. Enter the conguraon mode. The number of 1 will show up on the right side of the screen and
the device is ready for
conguraon.
2. Press LEFT and RIGHT to set the conguraon No. Press OK to enter the level-2 menu and view
the parameters. Press CANCEL, or conduct no
operaon for 5 s to cancel conguraon.
3. Press LEFT and RIGHT to set the parameters at your needs. Press OK to save the changes or
press CANCEL back to conguraon No. seng without saving changes. Conduct no operaons
for 5 s to cancel conguraon.
DS-K3G200(L)X Series Tripod Turnsle
19