HIKVISION DS-K3H4420-120 - Debugging Instruction; Notice of Use

Full high turnstile • User Manual
12
Debugging instruction
1) Check wire：Check whether the connection wire of the gate and the power line are properly
connected before power on.
2) Function test：
 Access control relay time should be set to 0 seconds or 1 second；
 Rod can not push without swipe valid card
 Indicator will show green and the rod of rotation can be pushed to 90 degree or 120 degree
when swipe valid card.
 If passager not go through ,turnstile will lock after 5 seconds
Notice of use
 If it tests well before installation, then fixed it; before you install and maintain it, please cut off
the power;
 The product must be earthed, and an earth leakage breaker is necessary on the power supply;
 Follow the order and pass one by one
 Please keep the control button or remote control far away from the children;
 Please don’t use the turnstile under the thunder and lightning condition to get rid of damage to
the equipment.