HIKVISION DS-K5032-D

Figure 8-8 Set Audio Parameters
Drag the block to adjust the output volume.
Click Save to save the sengs aer the conguraon.
You can also enable Voice Prompt.
Note
The funcons vary according to dierent models. Refers to the actual device for details.
8.3.11 Set Image Parameters
Set brightness, contrast, saturaon and hue parameters.
Steps
1.
Click Conguraon → Image .
2.
Congure the parameters to adjust the image.
Brightness
Drag the block or enter the value to adjust the live video's brightness. The value of brightness
is set 64 by default.
Contrast
Drag the block or enter the value to adjust the live video's contrast. The value of contrast is
set 32 by default.
Saturaon
Drag the block or enter the value to adjust the live video's saturaon. The value of saturaon
is set 64 by default.
Hue
Drag the block or enter the value to adjust the live video's hue. The value of hue is set 48 by
default.
DS-K5032 Series Visitor Terminal User Manual
67