HIKVISION DS-K5032-D

You can enter visitor informaon manually when the funcon is enabled.
ID Card Comparison Threshold
Drag the block or enter the value to adjust the card comparison threshold. The higher the value
is, the more unlikely for device to mismatch.
Auto Check-out
The system will auto check out all visitors at 24 o'clock every day when the
funcon is enabled.
Saving Visitor Records
When saving visitor records is enabled, the visitor's informaon will be recorded. For revisits,
the system will read from the card for
informaon to displayed on the screen.
Authencaon Mode
You can choose Comparison between Credenal Photo and Captured Face or Authencaon
Not Needed from the drop-down list according to actual need.
Print Visitor Receipt with ID Photo
When the funcon is enabled, the system will use the credenal photo as the prole image on
the visitor receipt. If the funcon is disabled, the captured image will be used.
Credenal Type
Other than card comparison, you can choose QR Code, Card, QR Code & Card or None for
visitor check-in.
Allow Non-Reserved Check In
When the
funcon is enabled, visitors without appointment are allowed to check-in on site.
Skip Person and ID Comparison
You can check Disable, Skip by Authorizaon Code or Skip Directly to manage person and ID
comparison.
Visitor Code Length
Choose 4 or 6 character digits according to actual needs.
Note
Visitors can ll out the informaon on APP to generate an authorizaon code and make an
appointment.
Auto Sync. Visitor Informaon
When the funcon is enabled, the visitor informaon of dierent devices added to the same
APP account will synchronize
automacally.
Auto-Sync Interval
Drag the block or enter an value to adjust auto-sync interval ranging from 5 to 60 minutes. The
visitor informaon will be synchronized at the set intervals.
Visitor Reservaon
Enable the funcon to allow visitor reservaon via plaorm.
DS-K5032 Series Visitor Terminal User Manual
74