3.
Select a device to link. Edit the following parameters.
Name
You can edit the name of the device.
Language
Select a language from the drop-down list for the device.
Network
Enable Auto Get IP Address and the system will assign IP address, subnet mask, and gateway
automacally. Or edit the IP address, subnet mask, and gateway manually.
Door Lock Parameters
Aer wire the lock with the door staon, you can set name and door opening duraon
according to your needs.
Note
Up to 2 locks can be congured.
Volume Sengs
Set microphone volume and output volume.
Call Number Sengs
The call No. should be the same as the indoor staon's room No. If press the call buon of
the door staon, you can call the indoor staon directly.
Public Password
You can use the public password to open the door staon related door lock. Select the public
password type. Enter the old password and new password and then
conrm the new
password. Tap OK to save the sengs.
Restore to Default Sengs
Restore All
All parameters will be restored to the factory sengs. The system will reboot to take
eect.
Device Reboot
Reboot the device.
3.3.3 Set Wi-Fi
Some indoor
staon support Wi-Fi connecon.
Note
Parts of models support seng Wi-Fi. For details, refers to actual product.
Network Indoor Staon Conguraon Guide
18