HIKVISION DS-KABH6320-T User Manual

Enter the device name, IP address, user name and the password of the camera. Edit port No.
and channel No.
Exit the page to save the sengs.
-
Select Open Network Video Interface to add the camera.
Enter the device name, IP address, user name and the password of the camera.
Exit the page to save the sengs.
3.3.7 Zone and Alarm Sengs
Zone Sengs
You can set the zone type, alarm type and delay me and other parameters of 8 zones.
Before You Start
Tap Sengs → → Shortcut Sengs , and enable Alarm.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable alarm funcon
rst.
1.
Tap Sengs → → Zone Sengs to enter the zone sengs page.
Figure 3-24 Zone Sengs
Network Indoor Staon Conguraon Guide
23

HIKVISION DS-KABH6320-T Specifications

General

Brand	HIKVISION
Model	DS-KABH6320-T
Category	Intercom System
Language	English