12
3 Getting Started
Getting Started section provides the quick usage guide to the doorbell and its related
application.
3.1 Set up Hik-Connect App
Hik-Connect App is necessary for the doorbell configuration and operation.
Before You Start
Make sure your mobile device has been connected to Wi-Fi.
Steps
1. Install Hik-Connect App and register a user account for iOS and Android.
1) Search “Hik-Connect” in App Store or Google Play™ to download and install the
App.
or
Figure 3-1 App Store/Google Play
2) Launch the App and follow the on-screen instructions to register a user account.
2. Start the Hik-Connect App, and log in to the App.
3.2 Set up Doorbell via App
To operate the doorbell normally, you should add the doorbell to the App, set its Wi-Fi
connection via App first, and activate it.
Two ways are available in setting up doorbell via App.
3.2.1 Mode 1
You can connect the Wi-Fi for the doorbell by using the camera of the doorbell to scan
the QR code generated by the App. Then you could add and activate the doorbell on the
App.
Connect Wi-Fi
You should set the Wi-Fi connection before adding the doorbell to the App and
operating the doorbell.
Steps
To Next Page
Loading...
Need help?
General
