HIKVISION DS-KB6003-WIP User Manual

16
4 Doorbell Operation
Via the Hik-Connect App, you can realize some certain functions of the doorbell
(including, but not limited to, live view, and remote playback).
Video Intercom
Press Call Button on the doorbell.
You can accept the call via the Hik-Connect App, get the live view of the doorbell, and
capture the snapshots.
Live View
Launch the Hik-Connect App and you can get the live view of the connected devices.
Playback
Launch the Hik-Connect App, tap a connected device and tap Gallery to play back.
Recording
Check the TF card status by tapping Storage Status in the Device Settings page.
If the TF card status displays as Uninitialized, tap to initialize it. The status will then
change to Normal. You can then start recording any event triggered video in the camera
of the doorbell such as motion detection video.
Alarm Notification
Launch the Hik-Connect App and tap Message to see the alarm messages, such as
motion detection alarm message.
 The messages will be pushed automatically by enabling Message Push Notification.
 The App can receive the triggered alarm automatically when the doorbell is powered
on by enabling Auto-Receive Alarm after Powering on.

HIKVISION DS-KB6003-WIP Specifications

General

Brand	HIKVISION
Model	DS-KB6003-WIP
Category	Accessories
Language	English