Sharpness
Sharpness describes the edge contrast of the image, which ranges from 1 to 100.
5.
Set the Day/Night Switch.
Figure 7-9 Day/Night Switch
-
Set or Night.
-
Set the mode as Auto and edit the according to your needs.
-
Set the mode as Scheduled-Switch. Set the start and end
6.
Set the backlight parameters.
Figure 7-10 Backlight
1) Check to enable BLC.
2) Select BLC Area.
DS-KB8113-IME1(B) Series Vandal-Resistant Door User Manual
36