HIKVISION DS-KB8113-IME1 Series - Page 48

OSD 
You can customize the camera name,  format on the live view.
Steps
1.
Click Image → OSD to enter the  page.
Figure 7-11 OSD
2.
Check to enable Display Name, Display Date or Display Week at your actual needs.
3.
Edit the Camera Name.
Note
You can edit the camera name only when Display Name is enabled.
4.
Select from the drop-down list to set the Time Format and Date Format.
5.
Click Save to enable the 
Target Cropping
Steps
1.
Click Image → Crop to enter the page.
2.
Check Enable Target Cropping to enable the 
3.
Click to capture photo.
4.
Click to start recording.
5.
Select Cropping .
6.
Click Save.
DS-KB8113-IME1(B) Series Vandal-Resistant Door  User Manual
37