HIKVISION DS-KH6320-WTE1 User Manual

Video Intercom Demo Case·User Manual
15
Tap Settings -> -> Hik-Connect Service to enable Hik-Connect Service before you
add the indoor station to the client.
Scan the QR code and edit the Verification Code on the page.
Figure 5-2 Hik-Connect Server Settings
5.2.2 Add Device to Mobile client via Serial No.
You can add the device to the mobile client by entering the device serial No.
You can get the serial No. on the Maintenance page: Settings ->Maintenance.
Figure 5-3 Enter the Serial No.

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%