Video Intercom Demo Case·User Manual
4
Figure 2-2 Wizard-Network Settings
1). Edit Local IP, Subnet Mask and Gateway parameters.
2). Enable DHCP, the device will get network parameters automatically.
3. Configure the indoor station and tap Next.
Figure 2-3 Wizard-Settings page
1). Choose Indoor station type.
2). Edit Floor and Room No.
4. Linked related devices and tap Next. If the device and the indoor station are in the
same LAN, the device will be displayed in the list. Tap the device or enter the serial
No. to link.
To Next Page
Loading...
Need help?
General
