HIKVISION DS-KH6320-WTE1 User Manual

Figure 2-8 Call Elevator
2.
Tap on the home page of the indoor staon to start calling the elevator.
3. When the device communicates with door
staon, tap unlock icon to start calling
the elevator.
2.7 Relay
Sengs
Aer you set the output parameters and display the relay buon on the main page,
you can control the relay manually.
Steps
1.
Tap
Sengs → → Output Sengs and disable Hide on Main Page funcon.
2.
Back to the main page and tap
.
3. Select a relay to enable or disable, the control device will start/stop working.
2.8
Informaon Management
You can view public noce, visitor message, alarm log and capture log on
informaon management page.
Tap Message on the home page to enter the
informaon management page. (Here
takes the alarm log page as an example.)
Network Indoor
Staon Operaon Guide
10

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%