HIKVISION DS-KH6320-WTE1 User Manual

3 Remote Operaon via the client
soware
The Video Intercom module provides remote control and conguraon on video
intercom products via the iVMS-4200 client
soware.
3.1 Call Indoor Staon
Steps
1. On the main page, click Access Control → Video Intercom to enter the Video
Intercom page.
2.
Select a resident and click in the Call Household column to start calling the
selected resident.
Figure 3-1 Calling Indoor Staon
3. Aer answered, you will enter the In Call window.
●
Click to adjust the volume of the loudspeaker.
●
Click Hang Up to hang up.
●
Click
to adjust the volume of the microphone.
Note
●
One indoor staon can only connect with one client soware.
●
You can set the maximum ring duraon ranging from 15s to 60s, and the
maximum speaking duraon ranging from 120s to 600s via the Remote
Conguraon of indoor staon.
Network Indoor Staon Operaon Guide
12

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%